Mechanistic Study of the Solvent-Dependent Formation of Extended and Stacked Supramolecular Polymers Composed of Bis(imidazolylporphyrinatozinc) Molecules

Bis(imidazolylporphyrinatozinc) molecules linked through a 1,3-butadiynylene moiety respond to the solvents they are dissolved in to afford exclusively extended (E) or stacked (S) supramolecular polymers. This system is expected to be a solvation/desolvation indicator. However, the principles underlying the solvent-dependent formation of the two types of polymers and the mechanism of the transformation between them are unclear. The formation of the polymers is considered to depend on the two types of complementary coordination bonds that can be formed and the π–π interactions between the porphyrins. In this study, the contributions and solvent dependence of both the coordination bonds and the π–π interactions have been investigated. The results clearly indicate that the coordination bonds are weakly or little solvent-dependent, and that the π–π interactions function effectively only in the inner porphyrins of the S-polymer and are strongly solvent-dependent. Thermodynamic analysis revealed that the formation of the E- or S-polymer in solution is determined by the total energies and the type of solvent used. The transformation of the E- to S-polymer was investigated by gel permeation chromatography. The kinetics of the transformation were also determined. The role of the terminal imidazolylporphyrinatozinc moieties was also investigated: The results indicate that the transformation from the E- to S-polymer occurs by an exchange mechanism between the polymers, induced by attack of terminal free imidazolyl groups on a polymer to zinc porphyrins on other polymers.     

Physical aging in amorphous poly(ethylene furanoate): Enthalpic recovery,density, and oxygen transport considerations

The current work utilizes three separate techniques to study the physical aging process in amorphous poly(ethylene furanoate) (PEF), which is a recently introduced engineering thermoplastic with enhanced properties compared to petroleum‐sourced poly(ethylene terephthalate). Differential scanning calorimetry aging experiments were conducted at multiple aging temperatures and times, and the resultant enthalpic recovery values compared to the theoretical maximum enthalpy loss evaluated from calculations involving extrapolation of the equilibrium liquid line. Density measurements reveal densification of the matrix for the aged versus unaged samples, and provide an estimate for the reduction in free volume for the aged samples. Complementary oxygen permeation and pressure‐decay sorption experiments provide independent verification of the free volume reduction mechanism for physical aging in glassy polymers. The current work provides the first detailed aging study for PEF. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 389–399     

Crosslinked poly(ethylene oxide) containing siloxanes fabricated through thiol‐ene photochemistry

Homogenous amphiphilic crosslinked polymer films comprising of poly(ethylene oxide) and polysiloxane were synthesized utilizing thiol‐ene “ click ” photochemistry. A systematic variation in polymer composition was Carried out to obtain high quality films with varied amount of siloxane and poly(ethylene oxide). These films showed improved gas separation performance with high gas permeabilities with good CO₂/N₂ selectivity. Furthermore, the resulting films were also tested for its biocompatibility, as a carrier media which allow human adult mesenchymal stem cells to retain their capacity for osteoblastic differentiation after transplantation. The obtained crosslinked films were characterized using differential scanning calorimetry, dynamic mechanical analysis, thermogravimetric analysis, FTIR, Raman‐IR , and small angle X‐ray scattering. The synthesis ease and commercial availability of the starting materials suggests that these new crosslinked polymer networks could find applications in wide range of applications. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1548–1557     

A Methodology for Estimating Kinetic Parameters and Reactivity Ratios of Multi‐site Type Catalysts Using Polymerization,Fractionation, and Spectroscopic Techniques

This work describes a polymer reaction engineering framework for understanding how catalyst kinetic parameters affect the microstructure of polyolefins made with single‐ or multi‐site catalysts. Moreover, a methodology for deconvolution and kinetic parameters estimation is presented to estimate the reactivity ratios of multi‐site catalysts based on the combination of polymerization, fractionation, and spectroscopic techniques, namely, gel permeation chromatography‐IR and carbon‐13 nuclear magnetic resonance spectroscopy. The methodology capabilities are then demonstrated and validated using a case study simulated via a Monte Carlo model including random noise in order to better represent experimental result uncertainties. The methodology can reverse engineer experimental results and estimate all relevant reaction performance parameters.     

Inverse colloidal crystal membranes for hydrophobic interaction membrane chromatography

Hydrophobic interaction membrane chromatography has gained interest due to its excellent performance in the purification of humanized monoclonal antibodies. The membrane material used in hydrophobic interaction membrane chromatography has typically been commercially available polyvinylidene fluoride. In this contribution, newly developed inverse colloidal crystal membranes that have uniform pores, high porosity and, therefore, high surface area for protein binding are used as hydrophobic interaction membrane chromatography membranes for humanized monoclonal antibody immunoglobulin G purification. The capacity of the inverse colloidal crystal membranes developed here is up to ten times greater than commercially available polyvinylidene fluoride membranes with a similar pore size. This work highlights the importance of developing uniform pore size high porosity membranes in order to maximize the capacity of hydrophobic interaction membrane chromatography.     

An improved cell membrane chromatography method for the simultaneous screening of two epidermal growth factor receptor antagonists from radix scutellariae

A high‐expression epidermal growth factor receptor cell membrane chromatography using the silica gel with the average particle size of 3 μm as the stationary phase carrier coupled with high‐performance liquid chromatography and mass spectrometry was established for the online screening of epidermal growth factor receptor antagonists from Radix Scutellariae (Huang Qin in Chinese), a traditional Chinese medicine. In this study, the growth factor receptor cell membrane chromatography model using the smaller particle size carrier showed a higher efficiency for simultaneous screening baicalein, another one of the potential epidermal growth factor receptor antagonists from Radix Scutellariae extract besides wogonin, which was found in our previous work. The molecular docking result showed the occupancy site and binding mode of baicalein and wogonin with epidermal growth factor receptor tyrosine kinase were similar to gefitinib. The result of the assay for the in vitro inhibitory activity showed that baicalein and wogonin inhibited the growth of the high‐expression epidermal growth factor receptor cell in a dose‐dependent manner and even achieved a better inhibition effect than gifitinib in the low‐dosage range.     

凝胶渗透色谱-气相色谱-离子阱质谱法测定桔梗原药和当归提取物中101种农药残留

建立了凝胶渗透色谱（GPC）-气相色谱-离子阱质谱同时检测桔梗原药和当归提取物中101种农药残留的分析方法。方法采用乙腈超声辅助提取桔梗原药和当归提取物,浓缩提取液至近干后用乙酸乙酯-环己烷（1∶1, v/v）复溶,采用凝胶渗透色谱法（选取40 cm长、内径20 mm的凝胶渗透色谱柱）对样品进行净化,弃去前段含脂类、色素等杂质的流出液,收集17~30 min洗脱液并旋转蒸发浓缩至近干,甲苯1 mL定容上机。选用DB-5MS毛细管色谱柱分离待测物,通过离子阱质谱实现对101种农药残留的高效检测。方法通过优化前处理条件和离子阱二级质谱参数,有效降低了复杂中药基质对待测化合物的干扰,最大限度提高了样品中农药的定量准确性和回收率,101种农药3水平添加的平均回收率为58.3%~108.9%,每个添加水平10次独立重复测定的相对标准偏差为0.4%~16.5%,检出限（LOD）范围为0.2~40.0 μg/kg,可满足当前韩国、日本、欧洲规定的最大残留限量（maximum residue limits, MRLs）要求。方法具有操作简单快速、灵敏度高、重复性好等特点,凝胶渗透色谱技术的应用克服了固相萃取小柱净化容量不足的弊端,离子阱技术的应用可以进一步排除共流出基体杂质的干扰,提高定量和定性的准确性,检测效果优于常用的气相色谱-质谱法,是对中药中同时分析多种农药残留检测方法的有益补充。     

Coronaviruses Use ACE2 Monomers as Entry-Receptors

The angiotensin-converting enzyme 2 (ACE2) has been identified as entry receptor on cells enabling binding and infection with the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) via trimeric spike (S) proteins protruding from the viral surface. It has been suggested that trimeric S proteins preferably bind to plasma membrane areas with high concentrations of possibly multimeric ACE2 receptors to achieve a higher binding and infection efficiency. Here we used direct stochastic optical reconstruction microscopy (dSTORM) in combination with different labeling approaches to visualize the distribution and quantify the expression of ACE2 on different cells. Our results reveal that endogenous ACE2 receptors are present as monomers in the plasma membrane with densities of only 1–2 receptors μm⁻². In addition, binding of trimeric S proteins does not induce the formation of ACE2 oligomers in the plasma membrane. Supported by infection studies using vesicular stomatitis virus (VSV) particles bearing S proteins our data demonstrate that a single S protein interaction per virus particle with a monomeric ACE2 receptor is sufficient for infection, which provides SARS-CoV-2 a high infectivity.     

Optimizing Membranes for Osmotic Power Generation

The design of ion-selective membranes is the key towards efficient reverse electrodialysis-based osmotic power conversion. The tradeoff between ion selectivity (output voltage) and ion permeability (output current) in existing porous membranes, however, limits the upgradation of power generation efficiency for practical applications. Thus, we provide the simple guidelines based on fundamentals of ion transport in nanofluidics for promoting osmotic power conversion. In addition, we discuss strategies for optimizing membrane performance through analysis of various material parameters in membrane design, such as pore size, surface charge, pore density, membrane thickness, ion pathway, pore order, and ionic diode effect. Lastly, a perspective on the future directions of membrane design to further maximize the efficiency of osmotic power conversion is outlined.     

Balancing the Crystallinity and Film Formation of Metal–Organic Framework Membranes through In Situ Modulation for Efficient Gas Separation

Polycrystalline metal–organic framework (MOF) layers hold great promise as molecular sieve membranes for efficient gas separation. Nevertheless, the high crystallinity tends to cause inter-crystalline defects/cracks in the nearby crystals, which makes crystalline porous materials face a great challenge in the fabrication of defect-free membranes. Herein, for the first time, we demonstrate the balance between crystallinity and film formation of MOF membrane through a facile in situ modulation strategy. Monocarboxylic acid was introduced as a modulator to regulate the crystallinity via competitive complexation and thus concomitantly control the film-forming state during membrane growth. Through adjusting the ratio of modulator acid/linker acid, an appropriate balance between this structural “trade-off” was achieved. The resulting MOF membrane with moderate crystallinity and coherent morphology exhibits molecular sieving for H₂/CO₂ separation with selectivity up to 82.5.